上海同泰机电设备有限公司_仿威图机柜 IP等级防护机柜机箱 AE,KL,AK,ES,PS机柜机箱 非标定制机柜 钣金操作台 成套控制柜

Technical features introduction

1. Install the embedded strip that has been installed in the assembly hole vertically welding on both sides of the box door, using M4 self-feed screw to facilitate installation

2. The sealing performance of the sealing ring is reliable

3. The door can be opened with a nail type hinge

4. The tank side prevents dust and water from entering the box, and can cooperate with the sealing ring in good condition to form the protection in the box

5. Wall-mounted box backboard has been installed to install wall eyelet, and equipped with hanging piece, convenient installation

6. The door can be interchangeable and installed to facilitate site installation and use

7. Color RAL7032,RAL7035 (computer grey computer white

8. Cold rolled steel sheet; Door 1.5-2.0 mm; Box 1.2-1.5 mm; Installation version 2.5mm (galvanized baking paint

9. Protection grade IP56

10. Surface treatment of phosphate powder (baking varnish)

AE Standard Configuration

Mounting plate; The door has two pieces; A set of wall hangings; 3-4 rubber ring for bottom inlet hole sealing ring; Simple packaging

Rain roofPrevent rainwater from entering

Hanging aWall fixed hole in the wall after the box body
The box can be simply fixed on the wall

Door barStay on both sides of the door
Vertical inserts are easy to install

AE wall hanging control box specification model